Post Driver,post Pounder:wrag Commander XL300 Tilt,90°Swing,Offset,110KlbsForce

Wrag Commercial Self-Contained Tractor 3-Point Commander XL300 Post Driver with 90° Swing, 4-Way Hydraulic Tilt & Telescopic Offset! Expect This Post Driver & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too! GENERAL FEATURES: In addition To Hydraulic (left & right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this Wrag Driver is also Self-Contained! The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck (usually in the engine compartment)! The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them, and also eliminates the down time caused by broken springs!

Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to efficiency & Straight Posts! 4-Way (Front & Back) Tilt adjustment is Hydraulic.90° Swing is from rear center mounted position to right of tractor (rotating counter-clockwise).Horizontal Telescoping Feature offers 14-1/2" of adjustment in any location of the 90° swing.Plus, the hydraulically positioned Headstock Frame, provides an additional 15" of horizontal offset positioning.Hydraulically Telescoping Mast Leg makes height position a piece of cake! Rear, adjustible Stabilizer Legs are standard, and work in conjunction with the Telescoping Mast Leg.All of the unique and easy to use positioning features assist in Driving straight Posts, and they eliminate the need for constantly re-positioning the Tractor to achieve precise placement of the Driver & Post - which provides an overall operation efficiency! Wrag Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility! Expect the 7/8" diameter, industrial poly/cotton braided Rope to have a very long, trouble free service life, and to be easy & safe on & for your hands!

This Unique Driver is also void of cables & hinged masts, which are more maintenance points, and which occasionally work against the operator! Also, since the post is not nested in the webbing of an 'I' beam (as w/most Drivers), this Wrag Driver enables filling an existing fence line with posts, w/o stretching or damaging the existing fence! Driver Ships Complete Including: Hydraulic Hoses & Couplers.For the toughest ground and/or largest post diameters, there is an optional Rock Spike & Extractor kit for making Pilot Holes.Rock Spike & Extractor Kit is a $3500.00 option & available to be listed on our classifieds board Store. Standard Rock Spike Tip is 4" diameter.Optional 6" diameter Rock Spike Tips are available for an additional $200.00.Sample photos show the Optional Rock Spike for reference only - it is NOT included with this listing.With Rock Spike & Extractor Kit 'Mounting Lugs' being a standard feature on this Driver, installation is a quick & simple one-bolt activity! The Spool Valve required for operating the Rock Spike & Extractor Kit is also standard on this Driver.Images of the Rock Spike can be seen at: Wrag USA.Adapters for Driving Tee Posts, Oil Field Pipe or Oil Field Casings are available for $200.00.Adapters have the same cost, but vary in dimension & configuration - specific application must be identified to get correct Adapter.Driver is shown on an 'LS' Tractor for reference only - Tractor is not included.

Specifications are based on manufacturer provided data & subject to change w/o notice. View a Video of a Wrag Post Driver at work at the following link: Wrag Post Driver. SPECIFICATIONS: Minimum hydraulic requirement is 15GPM/1800PSI.Maximum post diameter 8-1/4". Functionality Dimensions:Horizontal Telescoping & Offset (Travel Range is 14-1/2"):Center of 3-Pt Frame to Center of Post Cap, Retracted is 57".Center of 3-Pt Frame to Center of Post Cap, Extended is 71-1/2".Horizontally articulated/positioned Headstock Frame provides an additional 15" of offset positioning.Driver Legs Fully Extended:Drives maximum 9' long post.Drives down to +/- 30" above grade.Driver Legs Fully Retracted:Drives maximum 8' long post.Drives down to 18" above grade.Above spec's for Post Lengths & above grade positioning are conservative, and subject to Tractors 3-Point & tire sizes.Above spec's are as measured on a 80hp tractor w/30" rear tires, lift links mostly extended. Hammer weight is 660lb's.Impact at full stroke is 110,000lbs.

Overall length in the fully contracted position is 11'-0".Overall length in the fully extended position is 14'-0". 4-Way Tilt Adjustment (left/right-front/rear) is about 17°.Tilt Adjustment can be used in any of the other articulated positions! Horizontal Swing is 90° and is complimented with the Horizontal Telescoping feature! Weight is 2046lbs. Provide Us With Your Zip Code For A Quote Of Our Affordable Nationwide Delivery Costs!

DRIVER & PARTS ARE TYPICALLY IN STOCK (BUT YOU'RE WELCOME TO CONTACT US FOR AVAILABILITY)! Farm Equipment 24-7classifieds board Store of Iowa Farm EquipmentA FULL SERVICE DEALERSHIPProviding Parts & Warranty Coverage Nationwide! +More Contact Information Can Be Found On Our 'About Me' Page! +