John Deere 160LC Excavator One Owner

CLICK HERE TO SEE A VIDEO OF THIS ITEM IN ACTION. > Up for sale is a nice One owner 2002 John Deere 160LC 37500 lbs excavator with a digging depth of 18.5 feet! It has been check out from one end to the other, it is ready for work, Very well maintained machine up to date on all services It is showing Only 10000 hours! Very well maintained, Way above average condition for the hours! Runs and operates like a new one.

Machine starts and runs like it should, without any issues. It is straight and clean all over with little dents in sheet metal. It has just been repainted back to JD yellow has a 109 HP John Deere 4045H diesel engine that has no blowby. The unit is tight and everything works like it should. It comes with a 48" tooth bucket as seen in pictures 35.5 in track pads.Machine weight is 37500 lbsThere is no major leaks, machine is ready to go to work today.

We can ship this anywhere so contact us for a quote. Mon-fri 8-4:30 Indiana 7% sales tax applies to all buyers, unless you are tax exempt, or it is shipped out of state by a third party shipper, not affiliated with you. SpecificationEngine MakeJohn Deere Model4045H Net Power109 hp81.3 kw Power Measured @2300 rpm Displacement276 cu in4.5 L Torque Measured @1400 rpm Max Torque302 lb ft409.5 Nm Number of Cylinders4 AspirationTurbocharger and air-to-air charge air cooler Operational Operating Weight35620.1 lb16157 kg Fuel Capacity74 gal280.1 L Cooling System Fluid Capacity7 gal26.5 L Hydrauilc System Fluid Capacity44.9 gal170 L Engine Oil Capacity3.7 gal14 L Swing Drive Fluid Capacity1.2 gal4.5 L Operating Voltage24 V Alternator Supplied Amperage45 amps Hydraulic System Relief Valve Pressure4980 psi34335.9 kPa Hydraulic Pump Flow Capacity78.2 gal/min296 L/min Swing Mechanism Swing Speed13.6 rpm Swing Torque29850 lb ft40471.2 Nm Undercarriage Number of Shoes per Side43 Shoe Size23.6 in600 mm Number of Carrier Rollers per Side2 Number of Track Rollers per Side7 Ground Pressure5.5 psi37.6 kPa Max Travel Speed3.3 mph5.3 km/h Drawbar Pull 33670 lb149.8 kN Track Gaugeft inmm Buckets Reference Bucket Capacity1 yd30.78 m3 Minimum Bucket Capacity0.65 yd30.5 m3 Maximum Bucket Capacity1.7 yd31.3 m3 Boom/Stick Option (HEX) 1 Boom/Stick Option (HEX) 1Arm Length 8ft. 6in. (2.60m ) Shipping Height of Unit9.4 ft in2880 mm Shipping Length of Unit28 ft in8530 mm Max Digging Depth19.2 ft in5850 mm Max Reach Along Ground28.1 ft in8570 mm Max Cutting Height28.7 ft in8738.6 mm Max Loading Height20.7 ft in6300.2 mm Max Vertical Wall Digging Depth16.5 ft in5029.2 mm Boom/Stick Option (HEX) 2 Boom/Stick Option (HEX) 2Arm Length 10ft. 2in. (3.10m) Shipping Height of Unit9.4 ft in2880 mm Shipping Length of Unit28.1 ft in8560 mm Max Digging Depth20.9 ft in6360 mm Max Reach Along Ground29.6 ft in9030 mm Max Cutting Height29.5 ft in8991.6 mm Max Loading Height21.4 ft in6528.8 mm Max Vertical Wall Digging Depth18.3 ft in5562.6 mm Dimensions Width to Outside of Tracks8.5 ft in2590 mm Height to Top of Cab9.4 ft in2880 mm Ground Clearance1.5 ft in470 mm Counterweight Clearance3.3 ft in1000 mm Tail Swing Radius8 ft in2440 mm Length of Track on Ground10.2 ft in3100 mm