Equipment Type: Mini Excavator
390 HoursThis machine is full complete and in excellent condition.Net power 63 hp (47 kW) at 2,200 rpm Operating weight 6,100 kg (13,450 Ib) Bucket breakout force (SAE) 36.6 kN (8,220 lbf) Max dig depth 3,570 mm (11’9”) COOLANT AND LUBRICANT CAPACITY (Refilling) liter US gal Fuel tank 82.0 21.7 Engine coolant 11.0 2.9 Engine oil 11.6 3.1 Final drive (each) 1.2 0.3 Hydraulic tank 60.0 15.9 Hydraulic system 110.0 29.1 RELIEF VALVE SETTING Implement circuits 220 kgf/cm2 (3,130 psi) Travel circuit 220 kgf/cm2 (3,130 psi) Swing circuit 220 kgf/cm2 (3,130 psi) Pilot circuit 30 kgf/cm2 (430 psi) Service valve Installed HYDRAULIC MOTORS Travel Two-speed axial piston motor with counter balance valve and parking brake Swing Axial piston motor with automatic brake HYDRAULIC CYLINDERS No. Of cylinders bore X stroke Boom: 1-110 x 715 mm (4.3” x 28.1”) Arm: 1-85 x 840 mm (3.3” x 33.1”) Bucket: 1-80 x 660 mm (3.1” x 26.0”) Boom swing: 1-95 x 519 mm (3.7” x 20.4”) Dozer blade: 1-110 x 224 mm (4.3" x 8.8") TRAVEL SYSTEM Drive method Full hydrostatic type Drive motor Axial piston motor, in-shoe design Reduction system Planetary reduction gear Max. Drawbar pull 5,300 kgf (11,700 lbf) Max. Travel speed (high) / (low) 4.0 km/hr (2.5 mph) / 2.2 km/hr (1.4 mph) Gradeability 35o (70%) Parking brake Multi-wet disc ENGINE MODEL YANMAR 4TNV98C Type Water-cooled, 4-cycle diesel 4 cylinders in line, direct injection, low emission Rated flywheel horsepower SAE J1995 (gross) 64.7 HP (48.3 kW) at 2,200 rpm J1349 (net) 63 HP (47.0 kW) at 2,200 rpm Max. Torque 24 kgf.m (174 lbf.ft) at 1,560 rpm Bore X stroke 98 mm (3.86") x 110 mm (4.33") Piston displacement 3,319 cc (203 cu in) Battery 1 x 12 V x 100 Ah Starting motor 12V-3.0 kW Alternator 12V-80 Amp HYDRAULIC SYSTEM MAIN PUMP Type Variable-displacement piston pumps + gear pump Max.
Flow 2 X 55 ℓ/min (14.5 gpm) + 36.6 ℓ/min (9.6 gpm) at 2,000 rpm Sub-pump for pilot circuit Gear pump Cross-sensing and fuel-saving pump system WEIGHT Operating weight (cab) 6,100 Kg (13,450 lb) Ground pressure (cab) 0.35 kg/cm2 (4.98 psi) CONTROLS Pilot-pressure-operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control Two joysticks with one safety lever (LH): Arm swing, Boom swing (RH): Boom and bucket (ISO) Traveling and steering Two levers with pedals Engine throttle Electric, dial type UNDERCARRIAGE X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, track adjusters with shock absorbing springs and sprockets, and track chain with triple grouser shoes. Center frame X - leg type Track frame Pentagonal box type No. Of track shoes on each side 40 No.
Of upper rollers on each side 1 No. Of lower rollers on each side 5 SWING SYSTEM Swing motor Axial piston motor Swing reduction Planetary gear reduction Swing bearing lubrication Grease-bathed Swing brake Multi wet disc Swing speed 8.8 rpm EQUIPMENT Beacon lamp Accumulator Long arm (1.9 m I 6'3") Tool kit Cabin rear work lamp Safety lock v/v for boom cylinder with overload warning Safety lock v/v for arm cylinder Steel track shoes (380 mm / 14”) Rearview camera ISO standard cabin Cabin TOPS ISO 12117 (ROPS ISO 12117-2) FOG ISO 10262 Level I (FOPS ISO 3449 Level I) • All-weather steel cab with all-around visibility • Safety glass windows • Rise-up type windshield wiper • Sliding fold-in front window • Sliding side window • Lockable door • Accessory box and ashtray Air-conditioner and heater Travel alarm Quick coupler with piping Centralized monitoring • Engine speed • Gauges Fuel-level gauge Engine coolant temperature gauge • Warning Indicators Fuel-level Engine oil pressure Engine coolant temperature Hydraulic oil temperature Low battery Air cleaner clogging • Fuel prefilter Rubber track shoes (400 mm I 1’ 4”) Pattern-change lever Additional counterweight (200 kg I 440 lb) Door and cab locks, one key Radio / USB player with remote control Outside rearview mirror Single-acting piping kit (breaker, etc) Double-acting piping kit (clamshell, etc.) Fully adjustable suspension seat with seat belt Console box tilting system (LH.) Two front working lights Electric horn Battery (1 x 12 V x 100 Ah) Battery master switch 12-volt power supply Automatic swing brake Removable reservoir tank Water separator, fuel line Mono boom (2.9 m I 9’ 6”) Arm (1.48 m I 4’ 10”) Track rail guard Starting aid (air grid heater) cold weather Hyundai bucket (0.18 m3 / 0.24 yd3) Very nice machine! We can assist if you in locating a reputable shipper if you like. For quotes please contact us.
Add new question to the seller