Hyundai 60CR-9A Cab Excavator With A/c And Heat, 5.5 Led Screen!

Sales phone 4435 St Hwy 274 Trinidad Texas 75163 2017 HYUNDAI 60CR-9A CAB EXCAVATOR WITH A/C AND HEAT, 5.5 LED SCREEN, STRAIGHT BLADE!                                                                 Video Vehicle Information Year: 2017 Make: Hyundai Model: 60CR-9A Condition: Used Options and Standard Features Basic Information Year: 2017 Make: Hyundai Model: 60CR-9A Cab A/C And Heat 5.5 LED Screen Straight Blade Dual Front Auxiliary 14” Pin On Bucket With Thumb 24” Bucket 36” Bucket 64.7 HP Operating Weight 12,790 Lbs. Hours: 1024 S/N: HML04CH0000697 Engine Model: Yanmar 4TNV98C Type: Water Cooled, 4-Cycle Diesel, 4-Cylinders Inline, Direct Injection And Low Emission Rated Flywheel HP SAE Gross Power: 64.7 HP Net Power: 63 HP Max. Torque: 174 Lbf. At 1560 Rpm Bore X Stroke: 3.86” X 4.33” Piston Displacement: 203 Cu. In.

Batteries: 1 X12v X 100 Ah Starting Motor: 12V Alternator: 12V-20 A Drive Train Hydraulic System Type: Two Variable Displacement Axial Piston Pumps Max. Flow: 14.5 Gpm Sub-Pump For Pilot Circuit: Gear Pump Cross-Sensing And Fuel Saving Pump System Hydraulic Motors Travel: Two Speed Axial Piston Motor With Counterbalance Valve And Parking Brake Swing: Axial Piston Motor With Automatic Brake Relief Valve Setting Implement Circuits: 3,130 Psi Swing Circuit: 3,130 Psi Pilot Circuit: 430 Psi Service Valve: Installed Hydraulic Cylinders No. Of Cylinder Bore X Stroke Boom: 4.3” X 28.1” Arm: 3.3” X 33.1” Bucket: 301” X 26” Boom Swing: 3.7” X 20.4” Dozer Blade: 4.3” X 8.8” Drives & Brakes Drive Method: Fully Hydrostatic Type Drive Motor: Axial Piston Motor. In-Shoe Design Reduction System: Planetary Reduction Gear Max. Drawbar Pull: 11,700 Lbf Max.

Travel Speed (High/Low): 2.5 Mph/1.4 Mph Gradeabliity: 35 Degrees Parking Brake: Multi Wet Disc Dimensions Overall Height Of Cab: 8’4” Tail Swing Radius: 3’7” Tumbler Distance: 6’6” Overall Length: 18’4” Track Shoe Width: 1’4” Track Gauge: 5’3” Overall Width: 6’7” Ground Clearance: 1’3” Boom Length: 9’6” Arm Length: 6’3” Max. Digging Reach: 21’3” Max. Digging Reach On Ground: 20’10” Max. Digging Depth: 13’1” Max. Digging Depth (8’ Level): 11’11” Max.

Vertical Wall Digging Depth: 11’0” Max. Digging Height: 19’2” Max. Dumping Height: 13’5” Min. Front Swing Radius: 8’3” Specifications Swing System Swing Motor: Fixed Displacement Axial Pistons Motor Swing Reduction: Planetary Gear Reduction Swing Bearing Lubrication: Grease-Bathed Swing Brake: Multi Wet Disc Swing Speed: 8.8 Rpm Coolant & Lubricant Capactiy Fuel Tank: 21.7 Gal Engine Coolant: 2.9 Gal Engine Oil: 3.1 Gal Final Drive (Each): 0.3 Gal Hydraulic System: 29.1 Gal Hydraulic Tank: 15.9 Gal Operating Weight (Approx.) Rubber Track: 12,790 Lbs. Ground Pressure: 4.83 Psi Contact Providence Equipment LLC 4435 St Hwy 274 Trinidad Texas 75163 Ask for:Sales Office:phone _______________________________ Description 2017 HYUNDAI 60CR-9A CAB EXCAVATOR WITH A/C AND HEAT, 5.5 LED SCREEN, STRAIGHT BLADE, DUAL FRONT AUXILIARY, 14” PIN ON BUCKET WITH THUMB, 24” BUCKET, 36” BUCKET, 64.7 HP, AND OPERATING WEIGHT OF 12,790 LBS.!

THE 9A SERIES DELVERS FAST PRECISION BY COMBINING SMOOTHER HYDRAULICS WITH WIDER VIEW AND LESS STRESS. INNOVATIVE HYDRAULIC SYSTEM TECHNOLOGIES MAKE THE EXCAVATOR FAST, SMOOTH AND EASY TO CONTROL. THIS SERIES IS DESIGNED TO MAXIMIZE PROFITABILITY THROUGH IMPROVED FUEL EFFICIENCY, ENHANCED SERVICE FEATURES AND LONG-LASTING COMPONENTS! SE HABLA ESPAÑOL! BANK FINANCING AVAILABLE!

PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES! MACHINE VIDEO UPON REQUEST! Vehicle Information Year: 2017 Make: Hyundai Model: 60CR-9A Condition: Used Providences Location Only 55 miles South East of Dallas Terms Placing a Bid: Your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle.

Please read classifieds board's User AgreementProvidence Equipment LLC reserves the right to, Obtain and verify the registered information of all users who bid on this auction. Cancel any and all bids at our discretion, or end the auction early if necessary.Bidders Age: You must be 18 years of age or older to Bid. Special classifieds board Bid Retraction Rules: Please read classifieds board's "Retracting a Bid" If you place a bid before the last 12-hour period of the auction: You may retract that bid before that last 12-hour period but only for exceptional circumstances. You will not be allowed to retract that bid during the last 12-hour period of the auction. If you place a bid during the last 12-hour period of the auction: You will be allowed to retract the bid for exceptional circumstances but only if you do so within one hour after placing the bid.Funds & Financing: For help in arranging for a Pre-Approved loan or for any questions please e-mail email or phone Sales at phone prior to bidding.

Buyers Inspection: Providence Equipment LLC has done our best to disclose all information known about this vehicle for auction. Providence Equipment LLC welcomes a buyers inspection. If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending. Inspection fees if any are Buyers responsibility. Representations and Warranties made by seller: This vehicle is being sold "as is".

Manufacturer's warranties may still apply. Extended warranty may be available, e-mail email or phone Sales at phone for details. No representations or warranties are made by seller, nor are any representations or warranties relied upon by bidders in making bids. Taxes and Registration fees: Out of state buyers are responsible for all state, county, city taxes and fees, as well as title service fees in the state that the vehicle will be registered. All taxes and fees must be paid in full in order for vehicle to be titled and registered.

Title Information: Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. If payment is made by cashier's or personal checks we will hold all titles for 10 days or until funds have cleared. Shipping & Delivery: All shipping charges are buyer's responsibility.

Providence Equipment LLC will help with shipping arrangements but will not be responsible in any way for claims arising from shipping damage! Licensed Carriers are generally insured for $3,000,000.00. We assume no responsibility for damages incurred after the vehicle leaves our showroom. All shipping arrangements are provided by Providence Equipment LLC as a courtesy. We are not affiliated with any carrier.

Any claims or other communication regarding shipment of vehicles will be between you and the shipper, not with Providence Equipment LLC. The amount of time it takes for delivery is dependent on the carrier, but is generally 7-14 days from the date the vehicle is picked up from our facility until it is delivered to your destination. Verify with the shipper for an Estimate Time of Arrival to be sure. Finalizing your Purchase: Providence Equipment LLC will contact the successful high bidder by e-mail after the auction closes. Successful high bidder MUST communicate with Sales at Providence Equipment LLC by e-mail email or phone phone within 24 hours of the auction ending to make arrangements to complete their transaction.

If we cannot confirm your intention to buy or the sale is not completed within 5 days, we reserve the right to relist this vehicle or sell to any other qualified buyer. In order to secure bid on vehicle, Successful bidder (BUYER) must within 24 hours of bid closing send to Seller a Deposit in the amount of 10% by major credit card, cash in person or bank certified funds. Within 72 hours of bid closing, Buyer must send balance of funds by cash in person or bank certified funds to Seller. At time of sending initial deposit, Buyer MUST fax copy of their State issued valid Driver License. Furthermore, before said vehicle is released for shipment to Buyer, all other Sale related and title related paperwork must be signed and returned complete to Seller.

Copyright © 2022 Auction123 - All rights reserved. - Disclaimer Auction123 (a service and listing/software company) and the Seller has done his/her best to disclose the equipment/condition of this vehicle/purchase. However, Auction123 disclaims any warranty as to the accuracy or to the working condition of the vehicle/equipment listed. The purchaser or prospective purchaser should verify with the Seller the accuracy of all the information listed within this ad. 2017 HYUNDAI 60CR-9A CAB EXCAVATOR WITH A/C AND HEAT, 5.5 LED SCREEN, STRAIGHT BLADE, DUAL FRONT AUXILIARY, 14” PIN ON BUCKET WITH THUMB, 24” BUCKET, 36” BUCKET, 64.7 HP, AND OPERATING WEIGHT OF 12,790 LBS.!

THE 9A SERIES DELVERS FAST PRECISION BY COMBINING SMOOTHER HYDRAULICS WITH WIDER VIEW AND LESS STRESS. INNOVATIVE HYDRAULIC SYSTEM TECHNOLOGIES MAKE THE EXCAVATOR FAST, SMOOTH AND EASY TO CONTROL. THIS SERIES IS DESIGNED TO MAXIMIZE PROFITABILITY THROUGH IMPROVED FUEL EFFICIENCY, ENHANCED SERVICE FEATURES AND LONG-LASTING COMPONENTS! SE HABLA ESPAÑOL! BANK FINANCING AVAILABLE!

PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OU