Caterpillar 304E Cr Used

Sales phone 4435 St Hwy 274 Trinidad Texas 75163 17 CAT 304E CR2 MINI TRACK EXCAVATOR WITH OROPS, ANGLE BLADE!                                                                   Video Vehicle Information Year: 2017 Make: Caterpillar Model: 304E CR Condition: Used Options and Standard Features Basic Information Year: 2017 Make: Caterpillar Model: 304E CR2 OROPS Angle Blade 24” Pin On Tooth Bucket Auto Idle 2 Speed Dual Set Front Aux CAT Thumb 5” Colored Screen CAT Emissions Warranty Until 11/17/2022 Or 3000 Hours Hours: 423.7 Serial Number: CAT0304ECME402223 Engine Model: Cat C2.4 Net Power: 40.2 Hp Bore: 3.4 In Stroke: 4.0 In Displacement: 146.0 In3 Gross Power: 41.8 Hp Cooling System: 1.5 Gal Engine Oil: 2.5 Gal Hydraulic Tank: 11.2 Gal Fuel Tank: 12.2 Gal Hydraulic System: 17.2 Gal Drive Train Hydraulic System Pump Flow At 2,200 Rpm: 26.4 Gal/Min Operating Pressure – Equipment: 3553.0 Psi Operating Pressure – Travel: 3553.0 Psi Operating Pressure – Swing: 3132.0 Psi Auxiliary Circuit – Primary (186 Bar/2,734 Psi): 18.5 Gal/Min Auxiliary Circuit – Secondary (174 Bar/2,524 Psi): 6.6 Gal/Min Digging Force – Stick (Standard): 4856.0 Lb Digging Force – Stick (Long): 4384.0 Lb Digging Force – Bucket: 8498.0 Lb Type: Load Sensing Hydraulics With Variable Displacement Piston Pump Dimensions Standard Stick Dig Depth: 123.0 In Vertical Wall: 95.0 In Maximum Reach At Ground Level: 206.0 In Maximum Reach: 211.0 In Maximum Dig Height: 196.0 In Maximum Dump Clearance: 141.0 In Boom In Reach: 83.0 In Tail Swing: 38.0 In Maximum Blade Height: 16.0 In Maximum Blade Depth: 19.0 In Boom Height In Shipping Position: 58.0 In O/A Shipping Height: 98.0 In Swing Bearing Height: 22.0 In O/A Undercarriage Length: 87.0 In O/A Shipping Length: 190.0 In Boom Swing Right: 29.0 In Boom Swing Left: 26.0 In Track Belt/Shoe Width: 14.0 In O/A Track Width: 77.0 In Specifications Travel Speed – High: 3.2 Mph Travel Speed – Low: 2.1 Mph Maximum Traction Force – High Speed: 3799.0 Lb Maximum Traction Force – Low Speed: 6969.0 Lb Ground Pressure – Canopy: 4.1 Psi Gradeability (Maximum): 30Machine Swing Speed Boom Swing – Left (Without Stop): 70 Boom Swing – Left (With Stop): 55 Boom Swing – Right: 50Width Height: 12.8 In Dig Depth: 18.5 In Lift Height: 15.7 In Stick Length – Standard: 52.0 In Stick Length – Long: 64.0 In Machine Overhang: 0.0 Innumber Of Carrier Rollers Number Of Track Rollers: 4 Track Roller Type: Center Flange Contact Providence Equipment LLC 4435 St Hwy 274 Trinidad Texas 75163 Ask for:Sales Office:phone _______________________________ Description 2017 CAT 304E CR2 MINI TRACK EXCAVATOR WITH OROPS, ANGLE BLADE, 24” PIN ON TOOTH BUCKET, AUTO IDLE, 2 SPEED, DUAL SET FRONT AUX, CAT THUMB, 5” COLORED SCREEN, AND EMISSIONS WARRANTY UNTIL 11/17/2022 OR 3000 HOURS! CAT 304E CR2 MINI TRACK EXCAVATOR IS THE ALL-AROUND MACHINE FROM TOUGH CONSTRUCTION TO WORKING AROUND THE HOME, FARM OR RANCH. WITH 6.4 FT WIDTH AND A DIGGING DEPTH OF 10.3 FT YOU CAN FIT AND DIG ALMOST ANYWHERE. THIS MACHINE IS SMALL ENOUGH TO HAUL EASILY WITH A LIGHT TRAILER TO THE NEXT PROJECT, BUT PLENTY POWERFUL!

SE HABLA ESPAÑOL! FINANCING AVAILABLE! PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES! MACHINE VIDEO UPON REQUEST!

Vehicle Information Year: 2017 Make: Caterpillar Model: 304E CR Condition: Used Providences Location Only 55 miles South East of Dallas Terms Placing a Bid: Your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle. Please read classifieds board's User AgreementProvidence Equipment LLC reserves the right to, Obtain and verify the registered information of all users who bid on this auction. Cancel any and all bids at our discretion, or end the auction early if necessary.Bidders Age: You must be 18 years of age or older to Bid. Special classifieds board Bid Retraction Rules: Please read classifieds board's "Retracting a Bid" If you place a bid before the last 12-hour period of the auction: You may retract that bid before that last 12-hour period but only for exceptional circumstances.

You will not be allowed to retract that bid during the last 12-hour period of the auction. If you place a bid during the last 12-hour period of the auction: You will be allowed to retract the bid for exceptional circumstances but only if you do so within one hour after placing the bid.Funds & Financing: For help in arranging for a Pre-Approved loan or for any questions please e-mail email or phone Sales at phone prior to bidding. Buyers Inspection: Providence Equipment LLC has done our best to disclose all information known about this vehicle for auction. Providence Equipment LLC welcomes a buyers inspection. If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending.

Inspection fees if any are Buyers responsibility. Representations and Warranties made by seller: This vehicle is being sold "as is". Manufacturer's warranties may still apply. Extended warranty may be available, e-mail email or phone Sales at phone for details. No representations or warranties are made by seller, nor are any representations or warranties relied upon by bidders in making bids.

Taxes and Registration fees: Out of state buyers are responsible for all state, county, city taxes and fees, as well as title service fees in the state that the vehicle will be registered. All taxes and fees must be paid in full in order for vehicle to be titled and registered. Title Information: Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive.

If payment is made by cashier's or personal checks we will hold all titles for 10 days or until funds have cleared. Shipping & Delivery: All shipping charges are buyer's responsibility. Providence Equipment LLC will help with shipping arrangements but will not be responsible in any way for claims arising from shipping damage! Licensed Carriers are generally insured for $3,000,000.00. We assume no responsibility for damages incurred after the vehicle leaves our showroom.

All shipping arrangements are provided by Providence Equipment LLC as a courtesy. We are not affiliated with any carrier. Any claims or other communication regarding shipment of vehicles will be between you and the shipper, not with Providence Equipment LLC. The amount of time it takes for delivery is dependent on the carrier, but is generally 7-14 days from the date the vehicle is picked up from our facility until it is delivered to your destination. Verify with the shipper for an Estimate Time of Arrival to be sure.

Finalizing your Purchase: Providence Equipment LLC will contact the successful high bidder by e-mail after the auction closes. Successful high bidder MUST communicate with Sales at Providence Equipment LLC by e-mail email or phone phone within 24 hours of the auction ending to make arrangements to complete their transaction. If we cannot confirm your intention to buy or the sale is not completed within 5 days, we reserve the right to relist this vehicle or sell to any other qualified buyer. In order to secure bid on vehicle, Successful bidder (BUYER) must within 24 hours of bid closing send to Seller a Deposit in the amount of 10% by major credit card, cash in person or bank certified funds. Within 72 hours of bid closing, Buyer must send balance of funds by cash in person or bank certified funds to Seller.

At time of sending initial deposit, Buyer MUST fax copy of their State issued valid Driver License. Furthermore, before said vehicle is released for shipment to Buyer, all other Sale related and title related paperwork must be signed and returned complete to Seller. Copyright © 2021 Auction123 - All rights reserved. - Disclaimer Auction123 (a service and listing/software company) and the Seller has done his/her best to disclose the equipment/condition of this vehicle/purchase. However, Auction123 disclaims any warranty as to the accuracy or to the working condition of the vehicle/equipment listed.

The purchaser or prospective purchaser should verify with the Seller the accuracy of all the information listed within this ad. 2017 CAT 304E CR2 MINI TRACK EXCAVATOR WITH OROPS, ANGLE BLADE, 24” PIN ON TOOTH BUCKET, AUTO IDLE, 2 SPEED, DUAL SET FRONT AUX, CAT THUMB, 5” COLORED SCREEN, AND EMISSIONS WARRANTY UNTIL 11/17/2022 OR 3000 HOURS! CAT 304E CR2 MINI TRACK EXCAVATOR IS THE ALL-AROUND MACHINE FROM TOUGH CONSTRUCTION TO WORKING AROUND THE HOME, FARM OR RANCH. WITH 6.4 FT WIDTH AND A DIGGING DEPTH OF 10.3 FT YOU CAN FIT AND DIG ALMOST ANYWHERE. THIS MACHINE IS SMALL ENOUGH TO HAUL EASILY WITH A LIGHT TRAILER TO THE NEXT PROJECT, BUT PLENTY POWERFUL!

SE HABLA ESPAÑOL! FINANCING AVAILABLE! PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE