Case CX36B Mini Orops Excavator !

Sales phone 4435 St Hwy 274 Trinidad Texas 75163 2012 CASE CX36B MINI OROPS EXCAVATOR WITH A 4 WAY ANGLE BLADE, STANDARD FLOW, AND 12” AND 24” PIN ON BUCKETS!                                                                     Vehicle Information Year: 2012 Make: Case Model: CX36B Condition: Used Options and Standard Features Basic Information BASIC Year: 2012 Make: Case Model: CX36B OROPS 4 WAY ANGLE BLADE STANDARD FLOW 12” AND 24” PIN ON BUCKET Serial Number: NBTN63299 Hours: 3450 Engine Make: Yanmar Model: 3TNV88F-E Emissions Certification Tier 4 Final Fuel Diesel Cylinders 3 Displacement 100 In3 Fuel Injection Mechanical W/ Electronic Governor Fuel Injection Pump Direct Net Horsepower – SAE J1349 @ 2400 RPM 23.1 Hp Cooling Water-Cooled Dimensions Overall Height 8 Ft 3 In Overall Length 15 Ft 10 In Width Of Upper Structure 5 Ft 0 In Track Overall Length 7 Ft 1 In Track Overall Width With 11.8 In Shoes 5 Ft 7 In Track Shoe Width 11.8 In Center To Center – Idler To Sprocket 5 Ft 7 In Upper Structure Ground Clearance 1 Ft 10 In Minimum Ground Clearance 11.8 In Tail Swing Radius 2 Ft 10 In Backfill Blade Height 1 Ft 2 In Working Weight 8,554 Lb Ground Pressure 4.7 Psi Boom Swing 70 Left /60 Right Tail Swing Overhang 0 Ft 0 In Specifications DRIVETRAIN Travel Speeds 1St 1.6 Mph 2Nd 2.7 Mph Drawbar Pull 8,655 Lb Gradeability 30 Slope OPERATING WEIGHT Cab Operating Weight 8,554 Lb W/ Counterweight +551 Lb Canopy Operating Weight 8,212 Lb NOTE: W/ Operator/Full Fuel/Standard Equipment. HYDRAULICS Main Pumps Tandem Variable Displacement/ Axial Piston Pump Max. Rated Flow X 2 10.1 Gpm Auxiliary Flow 15.2 Gpm System Relief Pressure Standard 3,336 Psi Pilot Control Hydraulic System Pump Gear Pump Maximum Capacity 2.9 Gpm Relief Pressure 508 Psi Control Valves Pilot Control For Left /Right Track Travel, Boom, Arm, Bucket And Swing. Manual Control For Breaker And Backfill Blade.

Swing/Dozer Blade Motor Fixed Displaced Axial Piston Travel Motors – 2 Two-Speed Axial Piston Final Drive Planetary Gear Reduction Contact Providence Equipment LLC 4435 St Hwy 274 Trinidad Texas 75163 Ask for:Sales Office:phone _______________________________ Description 2012 CASE CX36B MINI OROPS EXCAVATOR WITH A 4 WAY ANGLE BLADE, STANDARD FLOW, AND 12” AND 24” PIN ON BUCKETS! The CASE CX36B mini excavator gives you the ability to travel and work within tight, restricted areas. Increased engine power along with hydraulic pressure and hydraulic flow combine to provide you with more power and speed for better cycle times, getting you through the toughest jobs quickly. For the ultimate in operating comfort, the CX36B offers a 20% larger platform to keep you comfortable and productive all day long as well as a 40% wider door frame, allowing easy entry and exit. READY TO WORK!

CALL US WITH ANY QUESTIONS! FINANCING AVAILABLE! ASK ABOUT OUR REASONABLE SHIPPING RATES! MACHINE VIDEOS UPON REQUEST! Vehicle Information Year: 2012 Make: Case Model: CX36B Condition: Used Providences Location Only 55 miles South East of Dallas Terms Placing a Bid: Your bid constitutes a legally binding contract to purchase this vehicle.

Please do not bid if you're not seriously interested or financially able to purchase this vehicle. Please read classifieds board's User AgreementProvidence Equipment LLC reserves the right to, Obtain and verify the registered information of all users who bid on this auction. Cancel any and all bids at our discretion, or end the auction early if necessary.Bidders Age: You must be 18 years of age or older to Bid. Special classifieds board Bid Retraction Rules: Please read classifieds board's "Retracting a Bid" If you place a bid before the last 12-hour period of the auction: You may retract that bid before that last 12-hour period but only for exceptional circumstances. You will not be allowed to retract that bid during the last 12-hour period of the auction.

If you place a bid during the last 12-hour period of the auction: You will be allowed to retract the bid for exceptional circumstances but only if you do so within one hour after placing the bid.Funds & Financing: For help in arranging for a Pre-Approved loan or for any questions please e-mail email or phone Sales at phone prior to bidding. Buyers Inspection: Providence Equipment LLC has done our best to disclose all information known about this vehicle for auction. Providence Equipment LLC welcomes a buyers inspection. If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending. Inspection fees if any are Buyers responsibility.

Representations and Warranties made by seller: This vehicle is being sold "as is". Manufacturer's warranties may still apply. Extended warranty may be available, e-mail email or phone Sales at phone for details. No representations or warranties are made by seller, nor are any representations or warranties relied upon by bidders in making bids. Taxes and Registration fees: Out of state buyers are responsible for all state, county, city taxes and fees, as well as title service fees in the state that the vehicle will be registered.

All taxes and fees must be paid in full in order for vehicle to be titled and registered. Title Information: Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. If payment is made by cashier's or personal checks we will hold all titles for 10 days or until funds have cleared.

Shipping & Delivery: All shipping charges are buyer's responsibility. Providence Equipment LLC will help with shipping arrangements but will not be responsible in any way for claims arising from shipping damage! Licensed Carriers are generally insured for $3,000,000.00. We assume no responsibility for damages incurred after the vehicle leaves our showroom. All shipping arrangements are provided by Providence Equipment LLC as a courtesy.

We are not affiliated with any carrier. Any claims or other communication regarding shipment of vehicles will be between you and the shipper, not with Providence Equipment LLC. The amount of time it takes for delivery is dependent on the carrier, but is generally 7-14 days from the date the vehicle is picked up from our facility until it is delivered to your destination. Verify with the shipper for an Estimate Time of Arrival to be sure. Finalizing your Purchase: Providence Equipment LLC will contact the successful high bidder by e-mail after the auction closes.

Successful high bidder MUST communicate with Sales at Providence Equipment LLC by e-mail email or phone phone within 24 hours of the auction ending to make arrangements to complete their transaction. If we cannot confirm your intention to buy or the sale is not completed within 5 days, we reserve the right to relist this vehicle or sell to any other qualified buyer. In order to secure bid on vehicle, Successful bidder (BUYER) must within 24 hours of bid closing send to Seller a Deposit in the amount of 10% by major credit card, cash in person or bank certified funds. Within 72 hours of bid closing, Buyer must send balance of funds by cash in person or bank certified funds to Seller. At time of sending initial deposit, Buyer MUST fax copy of their State issued valid Driver License.

Furthermore, before said vehicle is released for shipment to Buyer, all other Sale related and title related paperwork must be signed and returned complete to Seller. Copyright © 2021 Auction123 - All rights reserved. - Disclaimer Auction123 (a service and listing/software company) and the Seller has done his/her best to disclose the equipment/condition of this vehicle/purchase. However, Auction123 disclaims any warranty as to the accuracy or to the working condition of the vehicle/equipment listed. The purchaser or prospective purchaser should verify with the Seller the accuracy of all the information listed within this ad.

2012 CASE CX36B MINI OROPS EXCAVATOR WITH A 4 WAY ANGLE BLADE, STANDARD FLOW, AND 12” AND 24” PIN ON BUCKETS! The CASE CX36B mini excavator gives you the ability to travel and work within tight, restricted areas. Increased engine power along with hydraulic pressure and hydraulic flow combine to provide you with more power and speed for better cycle times, getting you through the toughest jobs quickly. For the ultimate in operating comfort, the CX36B offers a 20% larger platform to keep you comfortable and productive all day long as well as a 40% wider door frame, allowing easy entry and exit.READY TO WORK! CALL US WITH ANY QUESTIONS!

FINANCING A